logo
홈 뉴스

회사 소식 LED Application Scenarios: 1.0mm 1010 RGB Mini LED with Built-In IC for Backlights, AR/VR, Cars and Wearables

인증
중국 Dongguan Lanjin Optoelectronics Co., Ltd. 인증
중국 Dongguan Lanjin Optoelectronics Co., Ltd. 인증
고객 검토
믿을 수 있는 LED 부품 경쟁력 있는 가격으로 기술 팀은 우리의 조명 프로젝트에 강력한 지원을 제공합니다. 매우 추천합니다.

—— 닉

우리는 몇 년 동안 협력해 왔습니다. 안정적인 제품 성능과 전문적인 커뮤니케이션은 우리 사업이 꾸준히 성장하도록 도와줍니다.

—— 데이비드

신뢰할 수 있는 공급업체, 안정적인 품질, 언제나 원활한 협력.

—— 에랄도

좋은 품질의 LED 부품, 합리적인 가격과 신속한 배달. 구매에 만족, 추천합니다.

—— 테자스 k

지속적인 신뢰와 성원에 감사드립니다. 사업 번창하시고 모든 일이 잘 되시기를 바랍니다!

—— 토마소

귀하와 협력하게 되어 매우 기쁩니다. 지속적인 지원에 감사드립니다. 우리의 파트너십이 계속 성장하여 함께 더 많은 성과를 이루기를 바랍니다.

—— 라메쉬

우리는 당신의 신뢰할 수 있는 제품과 서비스를 감사합니다. 우리 사업이 계속 번영하길 바랍니다.

—— 페드로

신뢰해주셔서 감사합니다. 더 밝은 미래를 위해 계속 함께 노력하겠습니다.

—— 다이네시

함께해 주셔서 정말 멋진 여정이었습니다. 오랜 신뢰에 깊이 감사드립니다. 저희는 LED 제품과 서비스를 지속적으로 최적화하여 밝은 미래를 함께 만들어 나가겠습니다.

—— 그렉 조

지원에 감사드리며, 장기적인 협력을 기대합니다.

——   미르한

제가 지금 온라인 채팅 해요
회사 뉴스
LED Application Scenarios: 1.0mm 1010 RGB Mini LED with Built-In IC for Backlights, AR/VR, Cars and Wearables
에 대한 최신 회사 뉴스 LED Application Scenarios: 1.0mm 1010 RGB Mini LED with Built-In IC for Backlights, AR/VR, Cars and Wearables

1010 RGB Mini LED: The 1 mm Chip Powering Seven Fast Growing LED Application Scenarios

Walk the display halls this season and the question buyers keep asking is no longer "how bright is the LED" but "how small can the pixels get". Fine pitch signage, AR glasses, slim automotive ambience and wearables all push in the same direction: more colour, less board space, and control electronics hidden inside the package. That is exactly the space the 1010 RGB mini LED with built-in IC was engineered for.

💡 Model in focus: 1010 RGB mini LED with built-in IC — SK6805 / SK9818 compatible, footprint 1.0 × 1.0 × 0.8 mm, 5V DC, 20mA, 120° viewing angle, up to 60,000 hours lifetime, RoHS and Reach compliant, 8,000 pcs per reel.

Why a 1 mm chip changes the design brief

  • Built-in driver IC — each 1010 chip is addressable on its own, so designers drop the external shift register and save both PCB layers and assembly cost.
  • True RGB mixing in one package — red 620–630 nm, green 515–530 nm, blue 460–470 nm, delivering 120 / 280 / 100 mcd at 20mA.
  • Tiny but rugged — gold wire bonding, low light attenuation, operating range −40°C to +85°C, reflow compatible.
  • Single 5V rail — 3.5–5.5V forward voltage keeps controller design simple across the whole strip or panel.

Seven application scenarios already in production

1. Mini LED backlight for notebooks, monitors and TVs

Hundreds of zones, each a few chips wide: the 1010 gives local dimming resolution that 2020 and 2121 packages cannot reach in the same mechanical envelope. Higher contrast, deeper blacks, thinner modules.

2. AR / VR headsets and smart glasses

Eye-tracking indicators, status rings and micro-symbol lighting in a device where every cubic millimetre is budgeted. Addressable RGB from a single 5V line is the decisive advantage here.

3. Automotive interior ambience and light guides

Door panels, dashboard accent lines and switch backlighting need dense, uniform colour that survives vibration and heat. The 1010 fits into 1 mm light-guide channels and holds colour consistency −40°C to +85°C.

4. Wearables, LED handbags and colour fashion

A luminous handbag or a programmable jacket needs hundreds of independent pixels that flex without cracking. Low power dissipation of 60 mW per chip keeps battery life practical.

5. Fine pitch transparent and flexible pixel screens

Retail window displays, stage backdrops and exhibition booths moving to sub-2 mm pitch. The 120° viewing angle keeps colour stable from oblique sightlines on curved surfaces.

6. Smart home appliance indicators

Coffee machines, air purifiers and robot vacuums increasingly use a single RGB pixel instead of three discrete lamps — one part number, any status colour, smaller opening in the moulding.

7. Dynamic advertising and event lighting

Small pixel LED panels, marquee letters and interactive photo walls where refresh rate and colour uniformity decide whether the artwork looks premium or cheap.

Choosing the right footprint

Option Footprint Best fit
1010 RGB mini LED 1.0 × 1.0 × 0.8 mm Mini LED backlight, AR/VR, wearables, fine pitch
2020 / 2121 RGB 2.0 × 2.0 mm class Indoor pixel strips, decorative modules
3528 / 5050 RGB 3.5 × 2.8 mm and up Flexible strips, signage, general lighting effects

Where this chip actually ships from

Specifications are easy to copy; consistency across reels is not. Dongguan Lanjin Optoelectronics Co., Ltd., operating since 2005 in Dongguan, China, produces this 1010 RGB mini LED alongside its broader SMD, through-hole, high power and 7-segment ranges, with ISO 9001:2015 quality management, EU RoHS compliance and 18 years of OEM/ODM experience behind the production line. Colour binning is controlled reel to reel, so batches from the same order do not drift in brightness or hue — the single biggest complaint when mini LED panels are sourced from mixed suppliers.

Standard packaging is 8,000 pieces per reel, vacuum bag and export carton, MOQ 24,000 pieces, with samples available before mass production and 5–15 day delivery for repeat orders.

Buyer questions we hear most

Q: Is the IC really inside the package?
Yes. The driver is integrated, addressable per pixel, compatible with SK6805 and SK9818 protocols.

Q: Can it be reflow soldered on standard lines?
Yes, lead-free reflow at low temperature, with anti-static vacuum packaging for the reel.

Q: What about colour consistency in large volumes?
Binning is handled at source, and OEM colour targets can be locked into the production file.

Design tip: when you shrink from 2020 to 1010, keep the copper pad geometry identical in the panel layout and only change the stencil aperture — it usually removes one full re-qualification cycle.

선술집 시간 : 2026-10-29 17:15:14 >> 뉴스 명부
연락처 세부 사항
Dongguan Lanjin Optoelectronics Co., Ltd.

담당자: Miss. Ava Huang

전화 번호: +86 18819512052

팩스: 86-0769-89616935

회사에 직접 문의 보내기 (0 / 3000)